Data Sheet

Parker

SciLog SciCon Sensors Datasheet
SciLog SciCon 2018 Manual
SciLog SciPres IOMI Product Manual
SciLog SciPres Sensors Datasheet
SciLog SciTemp Sensors Datasheet
SciLog SciTemp 2018 Manual
SciLog DIN Modules 2018
Parker O-Ring Material Offering Guide (ORD 5712)
Parker Life Science Innovation Interactive Resource Guide
Parker Miniature Pumps Precision Fluidics
Parker Legris Connection Solutions for Life Sciences & Clean Rooms
Parker Legris General
Parker Hannifin Parflex tubing
Parker Advancements in Noise Reduction Techniques for Medical Equipment Manufacturers

 

Solenoid Valves and Pressure/Flow Controllers

Solenoid Valves – Air/Gas

PND Series - Miniature Pneumatic Solenoid Valve

Ecomonical, 10 mm normally open miniature exhaust valve designed for systems that require reliable and consistent pressure relief. Capable of flow rates up to 12 slpm with inlet pressures of up to 6 psig.

Product Information

The PND Series is a miniature, low cost, application-specific, 2-way Normally Open exhaust valve. Perfect for safety oriented applications that require pressure relief to atmosphere upon power loss.
  • Normally Open exhaust valve
  • Small Footprint valve at a low cost
  • Offers low holding voltage
  • Life Cycle rating of 250K (worse case tested, no degradation of performance)
  • 0.050” Orifice Standard with 2 M2 Mounting Holes
  • RoHS Compliant

Typical Applications:

Non-Invasive Blood Pressure Devices
Normally Open Fail-Safe Exhaust

Technical Specifications

Typical Applications:Blood Pressure Monitoring, Normally Open Fail-Safe Exhaust
Performance: Flow Rate Range:0 to 12 slpm
Performance: Pressure Range:0 to 6 psi
Cleanliness:Standard
Valve Configuration(Type):2-Way Normally Open
Life (# cycles):up to 250K
Pneumatic Connection Options:Barbed
Electrical Connection Options:Wire Leads
Leak Rate: Response Time: Power Requirement (Watts):0.5W
Weight:0.27 oz (7.7 g)

Dimensions

Width:0.52 in (13.21 mm)
Height:0.60 in (15.24 mm)
Length:1.01 in (25.60 mm)

Wetted Materials

Body:SPCC, PBT, 303 Stainless Steel
Seals(Elastomer):Silicon, Nickel-Plated Steel

Data Sheet

Series 25/26 - Miniature Solenoid Valve

15 mm stainless and brass PC mountable solenoid valve designed for medical and analytical devices and systems that require reliable and consistent performance with low outgassing and a bubble tight seal.

Product Information

Series 25, and 26 PC mountable solenoid valves convert a digital electrical signal into a digital pneumatic output. The patented miniature design is preferred by medical and analytical OEMs worldwide and allows valves to be soldered directly onto a printed circuit board, providing both electrical termination and mechanical attachment. These valves power small cylinders directly or can be used to pilot larger valves that require high flow rates.

Technical Specifications

Typical Applications:Oxygen Conservers and Concentrators, Sieve bed switching, Anesthesia Delivery, Compression Therapy, Gas Chromatography, Insufflators, Flow control/shut-off
Performance: Flow Rate Range:0 to 35 slpm
Performance: Pressure Range:0 to 100 psi
Cleanliness:Standard
Valve Configuration(Type):2/3 Way NC, 2/3 Way NO, 3 Way Distributor
Life (# cycles):Up to 200 Million Cycles
Pneumatic Connection Options:Manifold Mount, Barbs, 10-32 Female Threaded Port, 10-32 Male Threaded Port
Electrical Connection Options:Wire Leads, PC Mount, Quick Connect Spades, Solder Tabs
Leak Rate: Response Time: Power Requirement (Watts):0.5W, 1.0W, 2.0W
Weight:2.1 oz (60 g)

Dimensions

Width:0.63 in (15.88 mm)
Height:0.67 in (17.02 mm)
Length:2.04 in (51.69 mm)

Wetted Materials

Body:Brass 360 HO2, 430 FR Stainless Steel, 300 Series Stainless Steel
Seals(Elastomer):FKM, EPDM

Data Sheet

SRS - Miniature Pneumatic Solenoid Valve

Compact, 10 mm PBT plastic manifold mount valve designed for portable medical devices and those applications with limited space and available power.

Product Information

The 10mm SRS Series PBT plastic solenoid valve is compact and lightweight ideal for applications with limited space and weight constraints. Constructed of engineering thermoplastics and non-corrosive metals, the SRS is designed to exceed the specifications demanded by critical applications in life sciences. SRS valve can be easily integrated due to its manifold and PCB mount design and is available in 3-way normally open, 3-way normally closed and distributor configurations. Achieves rapid, stable performance.
  • Design incorporates thermoplastics and non-corrosive metals
  • Offers high-density manifold mounting with convenient manifold to PCB interface
  • Available in 3-way NO, NC and distributor configurations
  • Weighs only 0.23 ounces; perfect where system weight is critical
  • RoHS compliant

Typical Applications:

Air Over Liquid
Patient Simulators
Peritoneal Dialysis

Technical Specifications

Typical Applications:Air-over-liquid, Patient Simulators, Dialysis
Performance: Flow Rate Range:0 to 18 splm
Performance: Pressure Range:0 to 85 psi
Cleanliness:Standard
Valve Configuration(Type):2/3 Way NC, 2/3 Way NO, 3 Way Distributor
Life (# cycles):Up to 200 Million Cycles
Pneumatic Connection Options:Manifold Mount
Electrical Connection Options:Square pins front, square pins manifold, 18" lead wires
Leak Rate: Response Time: Power Requirement (Watts):0.5W, 1.0W
Weight:0.23 oz (6.57 g)

Dimensions

Width:0.39 in (10.01 mm)
Height:0.78 in (19.81 mm)
Length:1.50 in (38.10 mm)

Wetted Materials

Body:PBT, LNP Thermocomp®, 302 Series Stainless Steel, 430 FR Series Stainless Steel, CMI-B Core Iron, Nickel Plating
Seals(Elastomer):FKM

Data Sheet

V2 Valve - Miniature Pneumatic Solenoid Valve

Economical, 15 mm PBT plastic solenoid valve designed for medical devices and systems that require reliable and consistent performance.

Product Information

The V2 pneumatic solenoid valve provides an economical valve solution for designers and OEM’s with less stringent internal leak requirements. The valve utilizes a cost effective PBT plastic body and is offered in both a manifold mount and 1/8” barbed configuration. The V2’s electromechanical design allows for both electrical termination and mechanical attachment to printed circuit boards.
  • Cost-effective, PBT plastic body
  • Manifold mount or molded barbed fittings to fit a range of needs
  • Internal leak < 0.2 sccm of air
  • RoHS compliant

Typical Applications:

Oxygen Concentrators
Ventilators
Patient Simulators
Compression Therapy

Technical Specifications

Typical Applications:Oxygen Concentrators, Ventilators, Patient Simulators, Compression Therapy
Performance: Flow Rate Range:0 to 35 slpm
Performance: Pressure Range:0 to 100 psi
Cleanliness:Standard
Valve Configuration(Type):2/3 Way NC, 2/3 Way NO, 3 Way Distributor
Life (# cycles):Up to 25 Million Cycles
Pneumatic Connection Options:Manifold Mount, Barbs
Electrical Connection Options:Wire Leads, PC Mount
Leak Rate: Response Time: Power Requirement (Watts):0.5W, 1.0W 2.0W
Weight:1.2oz (35 g)

Dimensions

Width:0.63 in (15.88 mm)
Height:0.67 in (17.02 mm)
Length:2.02 in (51.31 mm)

Wetted Materials

Body:PBT, 36000 HO2 Brass, 430 FR Stainless Steel
Seals(Elastomer):FKM

Data Sheet

X-Valve - Miniature Pneumatic Solenoid Valve

Compact, 8 mm PBT plastic valve providing a very light weight solution for portable applications and those applications with limited space and available power.

Product Information

The X-Valve® is a miniature pneumatic solenoid valve measuring only 8 mm in width. The compact size, light weight and low power consumption of the X-Valve® is the ideal solution for portable applications and those applications with limited space and available power. The body construction of the X-Valve® is suited for manifold or barbed-tube pneumatic connections and is available in both 2-way and 3-way configurations.
  • Direct PC and side-to-side mounting enables compact and efficient system design
  • Large range of pressure options (6, 30 and 100 psi) to meet various application requirements
  • Light weight valve construction is ideal for portable applications
  • Available low power model (0.5 Watt) for continuous duty applications
  • RoHS compliant

Typical Applications:

  • Portable Equipment
  • Blood Pressure Monitoring
  • Wound Therapy
  • Air and Oxygen Delivery
  • Sensor Zeroing

Technical Specifications

Typical Applications:Portable Equipment, Blood Pressure Monitoring, Wound Therapy, Air and Oxygen Delivery, Sensor Zeroing
Performance: Flow Rate Range:0 to 11 slpm
Performance: Pressure Range:0 to 100 psi
Cleanliness:Standard
Valve Configuration(Type):2/3 Way NC, 2/3 Way NO, 3 Way Distributor
Life (# cycles):Up to 25 Million Cycles
Pneumatic Connection Options:Barbs, Manifold Compatible
Electrical Connection Options:Short Pins, Long Pins
Leak Rate:as low as .016 sccm
Response Time:as low as 20 msec
Power Requirement (Watts):0.5W, 1W
Weight:0.16 oz.(4.5g)

Dimensions

Width:0.31 in (7.87 mm)
Height:0.48 in (12.20 mm)
Length:0.92 in (23.37 mm)

Wetted Materials

Body:PBT, 430 Series Stainless Steel, 302 Series Stainless Steel
Seals(Elastomer):FKM, EPDM, Silicone

Data Sheet

Series 11 - Miniature Solenoid Valve

15 mm stainless and brass PC mountable solenoid valve designed for medical and analytical devices and systems that require reliable and consistent performance with low outgassing and a bubble tight seal.

Product Information


Series 25, and 26 PC mountable solenoid valves convert a digital electrical signal into a digital pneumatic output. The patented miniature design is preferred by medical and analytical OEMs worldwide and allows valves to be soldered directly onto a printed circuit board, providing both electrical termination and mechanical attachment. These valves power small cylinders directly or can be used to pilot larger valves that require high flow rates.

Technical Specifications


Typical Applications:Oxygen Conservers and Concentrators, Sieve bed switching, Anesthesia Delivery, Compression Therapy, Gas Chromatography, Insufflators, Flow control/shut-off
Performance: Flow Rate Range:0 to 35 slpm
Performance: Pressure Range:0 to 100 psi
Cleanliness:Standard
Valve Configuration(Type):2/3 Way NC, 2/3 Way NO, 3 Way Distributor
Life (# cycles):Up to 200 Million Cycles
Pneumatic Connection Options:Manifold Mount, Barbs, 10-32 Female Threaded Port, 10-32 Male Threaded Port
Electrical Connection Options:Wire Leads, PC Mount, Quick Connect Spades, Solder Tabs
Leak Rate: Response Time: Power Requirement (Watts):0.5W, 1.0W, 2.0W
Weight:2.1 oz (60 g)

Dimensions


Width:0.63 in (15.88 mm)
Height:0.67 in (17.02 mm)
Length:2.04 in (51.69 mm)

Wetted Materials


Body:Brass 360 HO2, 430 FR Stainless Steel, 300 Series Stainless Steel
Seals(Elastomer):FKM, EPDM

Data Sheet

Series MX (Magnum valve)

The Series MX is a miniature solenoid valve that delivers high flow at low pressure in a compact, 10 mm wide size. Using hit and hold control, the Series MX miniature solenoid consumes very little power helping medical device manufacturers increase battery life and reduce system weight without sacrificing performance.  The universal design supports manifold and barbed-tube mounting and is available in 2-way and 3-way configurations.  The Series MX is the ideal solution for portable medical devices with limited space and available power.

Features


• Small, 10mm size enables compact integration and reduces device size
• Highest flow to power consumption ratio increases device battery life
• Lightweight 0.3 oz (8.5 g) design helps reduce portable device weight
• Universal barbed-tube or manifold mount eases valve integration
• CE and RoHS compliant

Typical Applications


• Oxygen Concentrators
   - Sieve bed switching/equalization
   - Oxygen delivery
• Deep Vein Thrombosis
   - Cuff Inflation/Deflation Control
• Negative Pressure Wound Therapy
 - High Volume Vacuum/Pressure Control

Data Sheet

Series LX-valve

The Series LX-Valve is a miniature latching pneumatic solenoid valve measuring only 8 mm in width.

Features


• Internal latching mechanism enables continous, power free, operation with minimal/ momentary actuation power to change states.
• High flow output capability, (14 SLPM Minimum @ 20 PSI)

• Direct PC mounting and 11.2 mm valve mounting centers enables compact and lightweight system design.

• CE and RoHS compliant

Typical Applications


• Air and Oxygen delivery

Data Sheet

Miniature Cartridge Valves

These 2 & 3 way cartridge valves offer the most compact solution with a fast
response time and a very long service life thanks to its flat spring technology.
These miniature solenoid valves can be populated into the smallest portable
device improving performance, size and weight.
High-quality stainless steels and sealing materials make the valves suitable for use with a wide range of gases.
This range is available in 3 sizes (7, 15 & 21 mm) with a wide range of orifices (0,3 to 4 mm).

Market of interest


● Food & Beverage Processing
● Mobile / Transportation
● Industrial equipment
● Commercial Equipment

Typical applications


● Milk foam in full auto coffee machine
● Injection control in small engines
● Portable tooling
● Gas analysers
● Vacuum handling

Proportional Valves

Liquid Control Valves

Pressure & Flow Controllers

Diaphragm Pumps

Air/Gas

Liquid


LTC-IIS Low Noise Pump
LTC Diaphragm Pump

Syringe Pump

EAD Pumps

Air/ Gas

C5

Vaccum: -813 mbar
Pressure: 1,6 bar / > 2 bar
Flow: 6 LPM
Technical Data Sheet:

H30

Vaccum: -866 mbar
Pressure: >1 bar
Flow: 20 LPM
Technical Data Sheet:

EVO5

Vaccum: -960 mbar
Pressure: >2 bar
Flow: 10,5 LPM
Technical Data Sheet:

EVO10

Vaccum: -960 mbar
Pressure: >2 bar
Flow: 24 LPM

Vaccum: -960 mbar
Pressure: 1 bar
Flow: 20 LPM

Technical Data Sheet:

EVO10R

Vaccum: -946 mbar
Pressure: >2 bar
Flow: 23 LPM
Technical Data Sheet:

EVO30

Vaccum: -960 mbar
Pressure: > 1 bar
Flow: 44 LPM

Vaccum:-960 mbar
Pressure: > 2 bar
Flow: 38 LPM

Technical Data Sheet:

EVOR

Vaccum: -960 mbar
Pressure: > 2 bar
Flow: 12 LPM
Technical Data Sheet:

H5

Vaccum: -813 mbar
Pressure: 1,6 bar / > 2 bar
Flow: 6 LPM
Technical Data Sheet:

H5P3

Vaccum: SERIES -946 mbar | PARALLEL -813 mbar
Pressure: > 3,5 bar | 1,6 bar
Flow: 6 LPM | 12 LPM
Technical Data Sheet:

H10

Vaccum: - 813 mbar
Pressure: 1,4 bar
Flow: 14 LPM
Technical Data Sheet:

H30P3

Vaccum: SERIES -960 mbar | PARALLEL -880 mbar
Pressure: > 2 bar | 1 bar
Flow: 25 LPM | 48 LPM
Technical Data Sheet:

HX10

Vaccum: - 826 mbar
Pressure: 1,6 bar
Flow: 14 LPM
Technical Data Sheet:

HX10-05

Vaccum: -833 mbar
Pressure: >1,8 bar
Flow: 13 LPM
Technical Data Sheet:

HX10P3

SERIES
Vaccum:  -960 mbar
Pressure: > 2 bar
Flow: 14 LPM

PARALLEL
Vaccum: -826 mbar
Pressure: 1,6 bar
Flow: 27 LPM

Technical Data Sheet:

MR

Vaccum: -813 mbar
Pressure: 1,55 bar
Flow: 7,5 LPM
Technical Data Sheet:

MR10

Vaccum: -813 mbar
Pressure: 1,3 bar
Flow: 15 LPM
Technical Data Sheet:

MRP3

SERIES
Vaccum: -920 mbar
Pressure: >3 bar
Flow: 7 LPM

PARALLEL
Vaccum: -800 mbar
Pressure: 1,5 bar
Flow: 14 LPM

Technical Data Sheet:

NEO

SERIES
Vaccum: -906 mbar
Pressure: 1,2 bar
Flow: 7 LPM

PARALLEL
Vaccum: -773 mbar
Pressure: 1,5 bar
Flow: 4 LPM

Technical Data Sheet:

S5

Vaccum: -813 mbar
Pressure: 1,6 bar
Flow: 6 LPM
Technical Data Sheet:

S5P3

SERIES
Vaccum: -946 mbar
Pressure: > 3,5 bar
Flow: 6 LPM

PARALLEL
Vaccum: -813 mbar
Pressure: 1,6 bar
Flow: 12 LPM

Technical Data Sheet:

SR

Vaccum: -813 mbar
Pressure: 1,55 bar
Flow: 8 LPM
Technical Data Sheet:

SR10 Brushless

Vaccum: -826 mbar
Pressure: 1,3 bar
Flow: 14 LPM
Technical Data Sheet:

Z5

Vaccum: -867 mbar
Pressure: 1,2 bar
Flow: 6,5 LPM
Technical Data Sheet:

Z5P3

Vaccum: SERIES -960 mbar | PARALLEL -867 mbar
Pressure: > 2 bar | 1,2 bar
Flow: 6,5 LPM | 13 LPM
Technical Data Sheet:

ZR Brushless

Vaccum: -867 mbar
Pressure: 1,2 bar
Flow: 6 LPM
Technical Data Sheet:

ZR

Vaccum: -867 mbar
Pressure: 1,2 bar
Flow: 8,5 LPM
Technical Data Sheet:

ZRP3

Vaccum: SERIES -969 mbar | PARALLEL -867 mbar
Pressure: > 2 bar | 1,3 bar
Flow: 7,5 LPM | 15,5 LPM
Technical Data Sheet:

Liquid

CA5

Vaccum: -325 mbar
Flow: 0,55 LPM
Technical Data Sheet:

H5

Vaccum: -325 mbar
Flow: 0,55 LPM
Technical Data Sheet:

H5P3

SERIES
Vaccum: -520 mbar
Flow: 0,7 LPM
Technical Data Sheet:

PARALLEL
Vaccum: -350 mbar
Flow: 1,1 LPM
Technical Data Sheet:

MRP3

SERIES
Vaccum: -520 mbar
Flow: 0,7 LPM

PARALLEL
Vaccum: -350 mbar
Flow: 1,1 LPM
Technical Data Sheet:

Spare Parts

Silemblock

Technical Data Sheet:

Other Miniature Fluidics

Fluidic Dispense Systems

Value Plastics

Ark-Plas

Nitto Kohki